Solvent-free, two-component epoxy resin bonding agent
WILLPOX® 20 is a solvent-free, two-component reactant on an epoxy resin basis, free from alkyl phenol and benzyl alcohol with its adapted reactivity and the mechanical parameters of cured coatings being especially suited for sewer pipe renovation using the liner method.
|Mix ratio A : B||100 : 40|
|Pot life [min]||10|
|Curing time at 12°C [h]||3,5|
|Curing time at 60°C [h]||1|
|TDS & MSDS on request|
The component A (resin) and B (curing agent) are processed in a mixing ratio of 100 g (resin): 40 g (hardener). Tip the curing agent into the resin component and ensure that the curing agent component is entirely emptied out. Then stir the entire mixture very thoroughlywith a mechanical stirrer at a max. speed of 500 rpm (slow running drill with a stiring paddle attached). It is absolutely necessary that mixing also takes from the sides and bottom, so that the curing agent is also distributed vertically. Stir until the mixture is homogeneous (approx. 3 minutes). Do not process outside the delivery package. After mixing, transfer into a clean container and stir again carefully. When mixed, the temperature of the two components must be at least 15°C.
|Metal can 20 l||Comp. A 16,0 kg|
|Metal can 10 l||Comp. B 6,4 kg|
|Other packaging units on reques|