WILLIT® S-WS 30
Single-component, cement-based, ready-to-use dry-mix mortar
WILLIT® S-WS 30 is used for immediate closing of:
- water ingress into rock, concrete and masonry
- for sealing cable and pipe penetrations
- for the surface sealing of cracks during injections
|Processing time at 20°C [s]||60|
|TDS & MSDS on request|
Mix WILLIT® S-WS 30 with the specified water requirement to a plastic, easily deformable mass. The mixing time is approx. 15 seconds. Solidification occuw after approx. 90 seconds. Pre-form a plug from this mixture and hold it on a trowel or in the hand (use rubber gloves) until it has warmed up. Press this plug firmly into the break-out point - without moving the plug - until the water stops flowing. For longer cracks, seal from top to bottom.
Remove any protruding material flush. Then keep the repair area moist for at least 15 minutes.
|Plastic bucket 25 l||15 Kg|
|Other delivery forms on request|